Finding the Breakdown Cover That is Best for You
Car lighter/power socket broken… how to replace ?
Hi,
My car lighter socket is broken. (Its not the fuse). I need it to power my old pda/sat nav.
VW said they were £75 per hour + parts + VAT so I thought I’d try to do the replacement power socket myself. (£8 part)
I’ve got the part and removed the console to get at it…
but i can’t get the existing socket out of the red holder…..
Any ideas on how to release it out of that red plastic holder ? Its fitted in tight.. and I’ve tried to force it upwards but it won’t budge, and I can’t move it by pulling down (unless use maximum force which would prolly break/rip it out.
Long shot.. but any ideas ? Haynes manual doesn’t really cover this part of the repair well.. (push it out is what they say and its not moving)
No related posts.
| Print article | This entry was posted by admin on October 19, 2009 at 10:47 am, and is filed under Compare Breakdown Cover. Follow any responses to this post through RSS 2.0. You can leave a response or trackback from your own site. |
about 2 years ago
Try to twist it one way or the other gently. Then see if it pulls out.
about 2 years ago
1. make sure your pushing it the right way. but thats all ive ever done is just popped it out. make sure nothing is holding it back
about 2 years ago
Some of the earlier lighter sockets had a tin sleeve that screwed onto the other part of the socket! When the outer part is pushed into its hole, then that other part is screwed on from the back of it, where the wire connects to it. Sometimes they are tight. Check if you can see threads stamped into the bottom of the socket, where the wire connects. Unscrew the outer sleeve, and it should come out. Don’t know about a clip, have no experience with that, but try my idea first!
about 2 years ago
the bottom part of the lighter probably unscrews from the top part.